AS-601 Bulk Density Tester (CAT.No.030598) measures physically the apparent density of plastic materials and molding materials. Apparent Density Tester is produced according to international standard ISO 60 Plastics – Determination of Apparent Density of Material that can be poured from a specified funnel and the tested values is equivalent to ASTM D 1895 Standard Test Method for Apparent Density, Bulk Factor, and Pourability of Plastic Materials-Test Method A. Test Method A and ISO Method R 60 have been found to give values that differ by – 0.01 to + 0.03 apparent density units (g/cm3) based on the average of five tests for each of three materials.

iso-60-plastic-moulding-materials-bulk-density-apparatus-product-price-china-manufacturers

Principle
AS-601 Apparent Density Tester is designed according to ISO 60 international standard which specifies a method of determining the apparent density, that is the mass per unit of volume, of loose material (powder or granular material) that can be poured from a funnel of specified design.

Apparatus
-Measuring cylinder
-Funnel
-Stand
(Apparent Density Tester is Subject to Quotation)

Manufacturer
AimSizer is a world leading manufacturer of Apparent Density Testers, all the apparent density testers are designed and manufactured according to international standards on cost-effective basis.

Overview
AS-602 Bulk Density Tester is designed according to international standard ASTM D 1895 Standard Test Method for Apparent Density, Bulk Factor, and Pourability of Plastic Materials – Test Method B. AS-602 Apparent Density Tester is used to measure the apparent density of coarse, granular materials, including dice and pellets, that either cannot be poured or that pour with difficulty through the funnel described in ASTM D1895 Test Method A.

labulk-0308-plastic-materials-apparent-density-tester-astm-d-1895-method-b

Principle
AS-602 Apparent Density Tester is designed according to international standard ASTM D 1895 Standard Test Method for Apparent Density, Bulk Factor, and Pourability of Plastic Materials – Test Method B which specifies a method of determining the apparent density, that is the mass per unit of volume, of loose material (powder or granular material) that can be poured from a funnel of specified design.

Apparatus
-Measuring cup
-Funnel
-Stand
(Subject to Quotation)

Manufacturer
AimSizer is a world leading manufacturer of Apparent Density Testers, all the apparent density testers are designed and manufactured according to international standards on cost-effective basis.

Overview
AS-200 Scott volumeter  and Bulk Density Tester Apparent density meter determines bulk density of powders according to

- International Standard ISO 3923 – 2 Metallic powders – Determination of apparent density – Part 2: Scott volumeter method.
- USP Chapter 616 Bulk Density and Tapped Density of Powders Method II-Measurement in a Volumeter
- ASTM B 329 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter.
It is applicable to powders including metal powders, compounds, paint, pigment, refractory metals etc. that will not flow freely through a 5 mm orifice (see ISO 3923-1 or see AS-300).

as-200-scott-volumeter-bulk-density-tester-apparent-density-meter

Principle
Measurement of the mass of a certain quantity of powder which in a loose condition exactly fills a cup of known volume. The loose condition is obtained by using an apparent density tester, when filling the cup, by cascading the powder over a series of inclined plates in a Scott volumeter/Apparent Density Tester. The ratio between the mass and the volume represents the apparent density. This is the definition of the apparent density obtained by apparent density tester.

Apparatus
● Stand and horizontal vibration-free base
● Cylindrical/Density Cup
● Bottom Funnel
● (Top) Funnels
● Baffle box
● Spatula
● Brush

Applications
It is applicable to powders including metal powders, compounds, paint, pigment, refractory metals etc. that will not flow freely through a 5 mm orifice (see ISO 3923-1)

Manufacturer
Aimsizer Scientifc is a world leading and reliable manufacturer of Scott Volumeters. All the metallic parts are processed and supplied by qualified subcontractor according to International Standards in order to make the unit accurate and robust to satisfy the user’s requirement at cost-effective basis.

Demo Video
Scott Volumeter

Customize
In case user has his particular requirements please feel free to let us know and we will quote reasonable price.

AS-700(Labulk-0314) Instant Coffee Free-flow Bulk Density Tester measures

      -Bulk density

AS-700(Labulk-0314) Instant Coffee Free-flow Bulk Density Tester  is widely used in

      -Instant coffee

AS-700(Labulk-0314) Instant Coffee Free-flow Bulk Density Tester  features

      -Stainless steel funnel
      -Stainless steel measuring receptacle
      -Calibrated volume of measuring receptacle
      -Meet ISO 8460 Instant coffee—Determination of free-flow and compacted bulk densities

as-700-labulk-0314-iso8460-instant-coffee-bulk-density-tester-manufacturers-price

iso-8460-instant-coffee-bulk-density-apparatus-as-700

Overview
AimSizer 6393 Carr Index Powder Characteristics Tester is a powder testing apparatus designed by AimSizer Scientific according to ASTM D6393 Standard Test Method for Bulk Solids Characterization by Carr Indices. AimSizer 6393 analyses the flowability of powder including measurements of Carr angle of repose, Carr angle of fall, Carr angle of difference, Carr loose bulk density, Carr packed bulk density, Carr compressibility, Carr cohesion, Carr uniformity, Carr angle of spatula and Carr dispersibility. AimSizer 6393 has become the most cost-effective testing instrument conforming to ASTM D6393.

astm-d6393-carr-index-powder-characteristics-tester

Features
-Complete Carr index characterization in one instrument
-Automatic vibrating device
-Compact design with elegant appearance
-Easy-to-change test sieve
-Conforms to ASTM D6393
-Most cost-effective Carr Index testing apparatus
-Precise and robust metallic parts

FAQs
What is the name of international standard ASTM D 6393?
-Standard Test Method for Bulk Solids Characterization by Carr Indices

as-100-tap-density-tester-acoustic-cabinet

as-100-tap-density-tester-meter-volumeter-1-station-CAT NO.032798

as-100-tap-density-tester-dual-station-manufacturers-price-CAT NO.032698

as-100-tap-density-tester-simple-design-without-printer-1-station-CAT NO.030198

AS-100 Tap Density Tester / Meter is used to measure the tapped density or packed density of powders, as well as granulated or flaked materials by standardized and repeatable procedures according to international standards in

Pharmaceutical

- USP Chapter 616 Bulk Density & Tapped Density of Powders TAPPED DENSITY Method I & II

- European Pharmacopoeia EP Chapter 2.9.15 Apparent Volume

Metal powders in powder metallurgy (P/M)

-ISO 3953:1993 Metallic Powders-Determination of Tap Density

- ASTM B 527 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds Etc

AimSizer supplies 3 options tap density testers(CAT NO.030198/CAT NO.032698/CAT NO.032798)

Principle
Definition of tapped density is an increased bulk density attained after mechanically tapping a container containing the powder sample. Tapped density is obtained by mechanically tapping a graduated measuring cylinder or vessel containing a powder sample. After observing the initial powder volume or weight, the apparatus measuring cylinder or vessel is mechanically tapped, and volume or weight readings are taken until little further volume or weight change is observed. The mechanical tapping is achieved by raising the cylinder or vessel and allowing it to drop under its own weight a specified distance by either of three methods as during tapping may be preferred to minimize any possible separation of the mass during tapping down. This parameter is very important in packing the material. During tapping of the sample, the smaller particles try to fit themselves in gaps of the larger particles and hence the total volume of the powder reduces.

Specifications
Test Report Output:Integrated Micro Printer
Operation: LED and membrane pannel
Speed(Variable): USP and ASTM
Drop Height(Variable) : USP and ASTM
Accuracy:< 1 tap of 10000 taps
Input power: AC 220V/110V 60Hz
Dimensions:35.8 cm W x 51.6 cm H x 29.7 cm D (* height with 100mL cylinder)
Weight: 13.8 kg net; 20 kg gross
Recommended size of acoustic cabinet: 60 cm W x 80 cm H x 40 cm D (Internal size)
(Subject to definite models)

Features
Flexible parameter adjustment
The AS-100 Tap Density Tester changes easily the key parameter such as tapping speed and drop height in order to meet various international standards.
Fast and easy operation
The LED and mebrane control pannel brings operator a easy and fast operation. Accurate to 4 decimals. Automatically saving all the test information.
Reduced noise
AS-100 is available with an optional accoustic cabinet in order to reduce the noise level, while operator can monitor the operation through the front transparent plexiglass door. AimSizer gives optimum internal size in order to reduce the shipping cost as well.
Easily outputing hard copy
The integrated micro computer prints the test data including Sample No, Weight, Volume, Tap Number, Tap Density and Operator by simply pressing the button on membrane.
Easy to clean
The outter surface is plastic coated, it is strong and resistant to any powders non-corrosive or corrosive. It makes for the cleaning procedure as well as a longer working life.

Applications
Density measurement of Pharmaceuticals, Minerals, Pigment, Metal Powders, Catalysts, Coffee, Tea, Compounds and other powders suitable to be tested according to above mentioned international standards.

Manufacturer
AimSizer is a world leading supplier of Tap Density Tester, selected materials and standardized compoments contribute to a satsifactory Tap Density Tester. Over years AimSizer has supplied to hundreds of satisfactory users worldwide on cost-effective basis.

Demo Video

Tap Density Tester

Labulk-0306 Plastics Materials Apparent Density Apparatus(CAT.No.030698) is used to measure the apparent density of materials supplied in the form of coarse flakes, chips, cut fibers, or strands. Such materials cannot be poured through the funnels described in ASTM D1895 Test Methods A and B. Also, since they ordinarily are very bulky when loosely poured and since they usually are compressible to a lesser bulk, even by hand, a measure of their density under a small load is appropriate and useful.

labulk-0306-plastics-materials-apparent-density-apparatus

0307 Plastic Materials Apparent Density Apparatus(CAT.No.030798) is manufactured stringently according to international standard ASTM D1895 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials.

labulk-0307-plastics-materials-apparent-density-bulk-factor-and-pourability-apparatus

Labulk-0309 is both a Plastic Materials Pourability Tester and a Pharma Flowability Tester. It is a product designed to measure both the pourability of plastic materials and flowability of pharma.

labulk-0309-plastic-materials-pourability-tester-and-pharmaceutical-flowability-tester

Apparatus
-Funnel
-Funnel support
-Stopwatch
-Balance
(subject to quotation)

Overview

AS-100 Economic tap density tester is designed to meet basic requirement on tap density measurement. It consists of a timer, tap assembly, motor and cylinders. AS-100 is designed with fix rotating rate of 300±15 rpm. User needs to set the time of rotating according to the speed. It automatically stops when the time finishes. Calculate the tap density and tap volume to get the tap density of this powder.

Specifications

Physical property to measure: tap density
Sample loading volume: 5-250 mL
Timer range; 0-99999 sec
Tap height: 3 or 14 mm adjustable
Tap frequency: 300±15 rpm
Measurement: W28 x D24 x H18cm (Cylinder excepted)
Power: 220V/110V/50/60Hz

Functions

Measure tap density of bulk powders
110/220V and plug available as per request
Timed working, automatically stop at set time
Double work stations, two samples are tested at the same time
Appearance is exquisite, light weight and size, reasonable structure for easy maintenance
Tap height adjustable from 3 up to 14 mm to meet all standards
Meet accuracy and precision requirement of pharmaceuticals